S-COMP

Application Commercial buildings, hospitals, pharmaceuticals, HVAC
Type Ashrea
Media Waterproof micro glass fibers
Gasket Optional
Separator Thermoplastic hotmelt
Frame ABS and HIPS
Faceguard None
Filter Classification ePM10, ePM2,5, ePM1
Nominal Air Flow (m/s) 2.70
Air Volume (m³/hr) up till 5000
Initial Pressure drop (Pa) See table, used air velocity other than the nominal velocity may increase or reduce efficiency and initial resistance
Temperature (max) 70 °C in continuous operation

Certification

TripleAir Technology maintains a policy of continuous product research and improvement, and retains the right to change product specification and design without notice. © 2013.01 TAT

Technical Data

EN779;2012 Classification Dimensions WxHxD (mm) Nominal air flow (m³/hr) Initial resistance* ISO 16890 Classification
M6 592x592x292 3400 75 Pa ePM10 70%
M6 592x287x292 1700 75 Pa ePM10 70%
M6 592x490x292 3000 75 Pa ePM10 70%
F7 592x592x292 3400 80 Pa ePM1 55%
F7 592x287x292 1700 80 Pa ePM1 55%
F7 592x490x292 3000 80 Pa ePM1 55%
F8 592x592x292 3400 95 Pa ePM1 75%
F8 592x287x292 1700 95 Pa ePM1 75%
F8 592x490x292 3000 95 Pa ePM1 75%
F9 592x592x292 3400 110 Pa ePM1 85%
F9 592x287x292 1700 110 Pa ePM1 85%
F9 592x490x292 3000 110 Pa ePM1 85%

Note: other sizes and executions available upon request
* Tolerance on pressure drop ± 15%

Recommended final pressure drop: 450 Pa
Admissible relative humidity: < 100%

Contact met TripleAir