HOOD

Application Cleanroom supply air
Type EPA-HEPA and ULPA panel with own pressure plenum
Media Waterproof micro glass fibers
Gasket None or 2 component polyurethane endless seal
Separator Thermoplastic hotmelt
Frame Extruded anodized aluminium
Faceguard Mild steel epoxy coated (air leaving side)
Filter Classification E10 - U17
Velocity (m/s) 0.45
Initial Pressure drop (Pa) See table, used air velocity other than the nominal velocity may increase or reduce efficiency and initial resistance
Temperature (max) 70 °C maximum in continuous operation

Certification

TripleAir Technology maintains a policy of continuous product research and improvement, and retains the right to change product specification and design without notice. © 2013.01 TAT

Technical Data

Style code Dimensions WxHxD (mm) Filter classification EN1822 Nominal air flow (m/s) Air volume (m³/hr) Initial pressure drop (Pa)
TA-2-HD-14-G0-F1-250 305x610x125 H14 0.45 300 120
TA-2-HD-14-G0-F1-250 610x610x125 H14 0.45 600 120
TA-2-HD-14-G0-F1-250 610x762x125 H14 0.45 750 120
TA-2-HD-14-G0-F1-250 610x915x125 H14 0.45 900 120
TA-2-HD-14-G0-F1-250 610x1220x125 H14 0.45 1200 120
TA-2-HD-14-G0-F1-250 305x610x178 H14 0.45 300 70
TA-2-HD-14-G0-F1-250 610x610x178 H14 0.45 600 70
TA-2-HD-14-G0-F1-250 610x762x178 H14 0.45 750 70
TA-2-HD-14-G0-F1-250 610x1220x178 H14 0.45 1200 70

Note: other sizes and executions available upon request
* Tolerance on pressure drop ± 15%

Recommended final pressure drop: 600 Pa
Admissible relative humidity: < 100%

Contact met TripleAir