H-COMP

Application Commercial buildings, hospitals, pharmaceuticals, HVAC
Type EPA- HEPA
Media Waterproof micro glass fibers
Gasket Optional
Separator Thermoplastic hotmelt
Frame ABS (incinerable)
Faceguard None
Filter Classification E10 - H13
Air Volume (m³/hr) Up till 4250
Initial Pressure drop (Pa) See table, used air velocity other than the nominal velocity may increase or reduce efficiency and initial resistance.
Temperature (max) 70°C in continuous operation
Filter test (Filters are not leaktested)

Certification

TripleAir Technology maintains a policy of continuous product research and improvement, and retains the right to change product specification and design without notice. © 2013.01 TAT

Technical Data

Filter class Dimensions WxHxD (mm) Nominal air flow (m³/hr) Initial resistance* Efficiency
E10 592x592x292 3400 140 Pa 85%
E10 592x287x292 1700 140 Pa 85%
E10 592x490x292 3000 140 Pa 85%
E11 592x592x292 3000 150 Pa 95%
E11 592x287x292 1500 150 Pa 95%
E11 592x490x292 2600 150 Pa 95%
E12 592x592x292 3000 260 Pa 99.5%
E12 592x287x292 1500 260 Pa 99.5%
E12 592x490x292 2600 260 Pa 99.5%
H13 592x592x292 2000 200 Pa 99.95%
H13 592x287x292 1000 200 Pa 99.95%
H13 592x490x292 1700 200 Pa 99.95%

Note: other sizes and executions available upon request
* Tolerance on pressure drop ± 15%

Recommended final pressure drop: 600 Pa
Admissible relative humidity: < 100%

Contact met TripleAir