FLUIDSEAL

Application	Cleanroom supply- and return air, cleanbench filters
Type	EPA-HEPA and ULPA panel with a FluidSeal for 100% air tightness
Media	Waterproof micro glass fibers
Gasket	2 Component polyurethane gel
Separator	Thermoplastic hotmelt
Frame	Extruded anodized alumunium
Faceguard	Mild steel epoxy coated

Filter Classification	E11-U17
Nominal Airflow (m/s)	0.45
Air Volume (m³/hr)	up till 2700
Initial Pressure drop (Pa)	See table, used air velocity other than the nominal velocity may increase or reduce efficiency and initial resistance.
Temperature (max)	70°C in continuous operation

Certification

TripleAir Technology maintains a policy of continuous product research and improvement, and retains the right to change product specification and design without notice. © 2013.01 TAT

Technical Data

Style code	Dimensions (WxHxD) mm	Filter classification EN1822	Nominal air flow (m/s)	Air volume (m³/hr)	Initial pressure drop (Pa)
TA-2-FS-14-G2-F3	610x610x80	H14	0.45	600	120
TA-2-FS-14-G2-F3	610x762x80	H14	0.45	750	120
TA-2-FS-14-G2-F3	610x915x80	H14	0.45	900	120
TA-2-FS-14-G2-F3	610x1220x80	H14	0.45	1200	120
TA-2-FS-14-G2-F3	610x1524x80	H14	0.45	1500	120
TA-2-FS-14-G2-F3	610x1830x80	H14	0.45	1800	120
TA-3-FS-14-G2-F3	610x610x104	H14	0.45	600	85
TA-3-FS-14-G2-F3	610x762x104	H14	0.45	750	85
TA-3-FS-14-G2-F3	610x1220x104	H14	0.45	1200	85
TA-3-FS-14-G2-F3	610x1524x104	H14	0.45	1500	85
TA-3-FS-14-G2-F3	610x1830x104	H14	0.45	1800	85
TA-4-FS-14-G2-F3	610x610x128	H14	0.45	600	70
TA-4-FS-14-G2-F3	610x762x128	H14	0.45	750	70
TA-4-FS-14-G2-F3	610x1220x128	H14	0.45	1200	70
TA-4-FS-14-G2-F3	610x1524x128	H14	0.45	1500	70
TA-4-FS-14-G2-F3	610x1830x128	H14	0.45	1800	70

Note: other sizes and executions available upon request
* Tolerance on pressure drop ± 15%

Recommended final pressure drop: 500 Pa
Admissible relative humidity: <100%

Contact met TripleAir