In de weken 32 & 33 zijn wij gesloten, daarna staan we weer voor u klaar!

HICAP

Application Micro-electronics, pharmaceuticals, medical devices, hospitals and nuclear applications
Type EPA, HEPA
Media Waterproof micro glass fibers
Gasket Half round, 2 component polyurethane, one piece seal
Separator Thermoplastic hotmelt
Frame Galvanized or Stainless Steel
Faceguard None
Filter Classification E11-E12, H13-H14
Nominal Airflow (m/s) 1.50 - 3.00
Air Volume (m³/hr) up till 5000
Initial Pressure drop (Pa) See table, used air velocity other than the nominal velocity may increase or reduce efficiency and initial resistance.
Temperature (max) 70°C in continuous operation

Certification

TripleAir Technology maintains a policy of continuous product research and improvement, and retains the right to change product specification and design without notice. © 2013.01 TAT

Technical Data

Type Width Height Depth Airflow (m³/h) Initial resistance (Pa)* Filter class
TA-HICAP-11-G1-F0-1500 610 305 292 1500 200 E11
TA-HICAP-12-G1-F0-1500 610 305 292 1500 250 E12
TA-HICAP-13-G1-F0-1500 610 305 292 1500 250 H13
TA-HICAP-14-G1-F0-1500 610 305 292 1500 380 H14
TA-HICAP-11-G1-F0-2000 305 610 292 2000 200 E11
TA-HICAP-12-G1-F0-2000 305 610 292 2000 250 E12
TA-HICAP-13-G1-F0-2000 305 610 292 2000 250 H13
TA-HICAP-14-G1-F0-2000 305 610 292 2000 380 H14
TA-HICAP-11-G1-F0-4000 610 610 292 4000 200 E11
TA-HICAP-12-G1-F0-4000 610 610 292 4000 250 E12
TA-HICAP-13-G1-F0-4000 610 610 292 4000 250 H13
TA-HICAP-14-G1-F0-4000 610 610 292 4000 380 H14

Note: other sizes and executions available upon request
* Tolerance on pressure drop ± 15%

Recommended final pressure drop: 750 Pa

Admissible relative humidity: <100%

Contact met TripleAir